Specificaties Wireless Access Point WNDAP 350 en 360

Het grootste verschil tussen de WNDAP350 en WNDAP360 is de behuizing. De 350 heeft een robuuste metalen behuizing en de 360 een wit design uitstraling.

WNDAP350:

wndap350_frontloires18-5816.jpg

WNDAP360:

 WNDAP360_3-4Rt_LowRes18-35101.jpg

  • Performance - Wireless N with Concurrent dual band operation with quality of service
  • Mobility – Up to 15x the speed and 10x the coverage of legacy products
  • Security – Full enterprise security with WAP, WPA2, 802.1x with Radius and built in rogue AP detection

Power over Ethernet Required

  • Up to 12.8W

Physical Interfaces

  • One (1) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
  • Power adapter: 12V DC, 1A; plug is localized to country of sale
  • Five (5) LEDs: Power, test, 100/1000 Mbps, link/ACT, 2.4 GHz band, 5.0 GHz band
  • One (1) console port with standard RS-232C interface with DB-9 male connector
  • Two (2) reverse SMA antenna connectors 
    Note: Not recommended for use with ProSafe Antennas ANT2405, ANT2409 or ANT24D18.

Advanced Wireless Features

  • Point-to-point wireless bridge mode
  • Point-to-multipoint wireless bridge mode
  • Repeater mode
  • Simultaneous wireless bridge and access point mode
  • Wireless Distribution System (WDS)
  • Adjustable transmit power control (TPC) from 100 mW down to 0 mW

Warranty

  • Access point: NETGEAR Lifetime Warranty
  • Power supply: 3-year warranty

Package Contents

  • ProSafe Dual Band Wireless Access Point
  • Ethernet cable
  • Wall-mount kit
  • Installation guide
  • Resource CD
  • 12V, 1A power adapter, localized to country of sale
Hebt u meer vragen? Een aanvraag indienen

Opmerkingen