10 Gigabit ethernet voor iedereen!

NETGEAR maakt 10 Gigabit ethernet nu echt voor iedereen beschikbaar met de XSM7224 (M7100-24X), de eerste betaalbare 10GBase-T Switch. 

Bekijk de brochure van de M7100 of lees meer op de NETGEAR website: http://www.netgear.com/business/products/switches/fully-managed-switches/10-gigabit/M7100.aspx

 

  • 24 ports copper 10GBase-T / 4 ports SFP+
  • Backward compatible Gigabit and Fast Ethernet
  • Line-rate for virtualization and convergence
  • Innovative multi-vendor Auto-iSCSI optimization
  • Dual redundant PSUs / Fan trays
  • Designed for top-of-rack and distribution

The NETGEAR® 10 Gigabit M7100 series consists of a fully managed, low-latency, line-rate 10G Copper "Base-T" switch solution; 24 ports 10GBase-T (RJ45) that support Fast Ethernet, Gigabit Ethernet and 10 Gigabit speeds for server, storage and network progressive upgrade; 4 ports SFP+ that broaden 10 Gigabit connectivity for 1G/10G fiber uplinks and other DAC connections.

M7100 series is ideal for all organizations considering reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack server access layer; and high-density, high-performance 10GbE backbone architectures.

Layer 2+ with static routing
  • M7100 series comes with Port-based / VLAN-based / Subnet-based "static routing" Layer 2+ versions
  • L3 fixed routes to the next hop towards the destination network are added to the routing table
  • L3 routing is wire-speed in M7100 series hardware with up to 128 static routes (IPv4)
10 Gigabit transition with Base-T
  • 10GBase-T, like other Base-T technologies, uses the standard RJ45 Ethernet jack
  • It is backward compatible, auto-negotiating between higher and lower speeds – thereby not forcing an all at once network equipment upgrade
  • Cat5/Cat5E are supported for Gigabit speeds; when Cat6 twisted pair copper cabling is minimum requirement for 10 Gigabit up to 30 meters
  • Cat6A or newer Cat7 cabling allow for up to 100 meter 10GBase-T connections
Top-of-the-line performance and IPv6 ready
  • 32K MAC addresses; 480Gbps switching fabric; 12K jumbo frames; Auto-iSCSI Flow Acceleration; Auto-EEE Energy Efficient Ethernet
  • IPv4/IPv6 comprehensive traffic filtering (ACLs), and prioritization (QoS - DiffServ)
Top-of-rack availability
  • Two redundant, hot-swap power supplies (one PSU comes with the switch; second optional PSU is ordered separately)
  • Two removable fan trays provide front-to-back cooling airflow for best compatibility with data center hot aisle / cold aisle airflow patterns
Industry standard management
  • Industry standard command line interface (CLI)
  • Fully functional NETGEAR web interface (GUI)
Industry leading warranty
  • NETGEAR M7100 series is backed by NETGEAR ProSafe Lifetime Hardware Warrantyʈ
  • Also included ProSupport Lifetime 24x7 Advanced Technical Support*
  • Also included 3-Year Next Business Day Onsite Hardware Replacement**
Hebt u meer vragen? Een aanvraag indienen

Opmerkingen